Shanghai ALWELL Machinery Equipment Co., Ltd. will present its syringe filling machine range at Pharmtech & Ingredients 2026, held 24–27 November 2026 at Crocus Expo International Exhibition Centre in Moscow. Visitors will find the ALWELL team at Booth C8185, where engineers will walk through automatic pre-filled syringe filling and stoppering configurations for 1 ml long through 20 ml formats, discuss ±1% dosing accuracy, and review GMP and CE documentation for Russian and EAEU pharmaceutical projects. This news update explains what will be on display, who should visit, and how to reserve a technical meeting before the show floor opens.
Event Details: Pharmtech & Ingredients 2026, 24–27 November, Crocus Expo
Pharmtech & Ingredients is the largest exhibition in Russia and the EAEU region dedicated to equipment, raw materials and technologies for pharmaceutical production, and the 2026 edition runs for four days from Tuesday 24 November to Friday 27 November at Crocus Expo in Moscow. The show brings together equipment builders, contract manufacturers, biopharma developers and ingredient suppliers under one roof, which makes it the most efficient week of the year for a Russian pharma team to compare filling technologies side by side.
ALWELL will occupy Booth C8185 for the full four days. Because the majority of enquiries at this exhibition move from a first conversation to a formal technical proposal, the team is arriving with engineering staff rather than sales staff alone: questions about nest formats, stopper geometry, laminar flow interfaces and validation deliverables can be answered on the spot instead of by email after the show.
For planning purposes, the exhibition is open to trade visitors only and admission is by pre-registration through the organiser. Visitors who want a guaranteed discussion slot with our engineers should request an appointment in advance - details are in the booking section below.
What We Are Showing: Automatic Syringe Filling Machine Range
The centrepiece of the stand is the automatic syringe filling machine platform that ALWELL has developed since 2013 for small-dose injectable production. The platform combines servo-driven dosing, in-process weight checks and vacuum-assisted stoppering in a single monoblock frame, and it is the same architecture used in our exported lines across Europe, the Americas, the Middle East and Southeast Asia.
Servo dosing accuracy of ±1% across the fill range
Dosing is handled by servo-driven piston or ceramic pump systems depending on product viscosity, with accuracy held at or better than ±1% of the target fill volume. For high-value biologics and hyaluronic acid fillers, where overfilling is a direct cost and underfilling is a regulatory risk, that tolerance is the difference between a viable batch yield and a rejected one. Engineers at the booth can run through the calibration logic, the tare-and-check sequence, and how the recipe manager stores format-specific parameters for repeatable changeovers.
Vacuum stoppering that removes headspace bubbles
Bubble-free filling is the single most common technical objection raised by medical aesthetics and biopharma buyers, and it is the reason ALWELL builds vacuum-assisted stoppering into the line rather than offering it as an add-on. After dosing, the nest is drawn down and the stopper is inserted under controlled vacuum so that residual air is evacuated before the closure seats. The result is a syringe with a clean, level meniscus and no visible bubble band - a presentation standard that distributors of dermal fillers and pre-filled saline routinely enforce. The same vacuum module is the one specified on our syringe filling and stoppering machine, so the behaviour described at the stand is the behaviour documented in the validation file.
Format flexibility from 1 ml long to 20 ml
One machine does not serve every product, but one supplier should. The range covers 1 ml long, 1–3 ml, 5 ml, 10 ml and 20 ml pre-filled needle tubes, plus nested ready-to-use formats and cartridge variants for insulin, GLP-1 and dental anaesthetic products. Changeover is recipe-driven, with format parts exchanged as tooling sets so that a contract manufacturer running several SKUs does not have to duplicate capital equipment. Visitors are welcome to bring sample syringes, nests or cartridges to the stand; our engineers will confirm whether the existing tooling set handles the format or whether a custom set is required.
Pre-filled Syringe Filling Machine Configurations for Aseptic Production
Beyond the single-machine view, most projects at this exhibition are scoped as complete lines. ALWELL builds a pre-filled syringe filling machine as one module inside a sequence that typically also includes loading, inspection, labelling and secondary packaging, and the stand will carry layout drawings for the configurations most often requested by Russian and EAEU manufacturers. Teams weighing a standalone PFS filling machine against a fully integrated line can compare both layouts side by side.
RTU nested lines for sterile-ready components
Ready-to-use nested syringes arrive sterile and require the filling line to work inside the nest rather than on loose tubes. Our nested PFS lines are designed around that constraint: the nest is transferred without manual handling, dosing needles enter through the nest channels, and stoppering is completed before the nest leaves the aseptic zone. This reduces particle generation and removes the need for an upstream washing and depyrogenation tunnel, which is often the deciding factor for a greenfield facility with a limited cleanroom footprint.
Flush and saline syringe lines for high-volume medical devices
Saline flush syringes sit at the boundary between pharmaceutical and medical device manufacturing: volumes are large, margins are thin, and the fill is typically 0.9% normal saline rather than an active ingredient. ALWELL supplies aseptic filling lines for saline syringes as fully automatic sequences covering filling, stoppering, labelling and packaging, with the syringe labeling machine aligned to the flange rather than the barrel so that the graduation marks stay readable after the wrap is applied. Buyers evaluating this segment should compare total line uptime, not just filling speed.
Cartridge and vial modules on the same platform
Teams that also produce insulin cartridges, dental cartridges or small-dose vials can review the cartridge filling and sealing module and the automatic vial filling and stoppering machine at the same meeting. Sharing the dosing platform across syringe, cartridge and vial formats shortens operator training and simplifies spare-parts inventory - a practical advantage that rarely appears in a specification sheet but shows up quickly in maintenance costs.
Why the Russian and EAEU Market Is Reviewing Filling Capacity Now
Pharmaceutical manufacturing in Russia and the surrounding EAEU markets is in a multi-year investment cycle driven by localisation requirements and by the re-routing of supply relationships. Producers that previously relied on imported finished injectables are moving toward domestic fill-finish capacity, and contract manufacturers are being asked to take on formats - pre-filled syringes, cartridges, flush syringes - that they did not run five years ago. That shift creates demand for equipment that can be installed, validated and supported without a long chain of intermediaries.
The practical questions we hear from this market are consistent: can the syringe filling machine and its downstream modules be validated locally, what documentation accompanies the machine, how quickly can spare parts and engineers arrive, and can the same platform handle several formats as the product portfolio evolves. Pharmtech & Ingredients is the natural place to answer them, because the technical staff who specify the equipment attend in person rather than delegating the conversation.
For buyers comparing suppliers, the useful comparison is not a single headline speed figure. It is the combination of dosing accuracy, bubble performance at the target viscosity, changeover time between formats, documentation quality and long-term service access. We will bring data on all five to the stand.
Compliance Documentation: GMP, CE and Validation Support
ALWELL equipment is built to GMP requirements and carries European Union CE certification, and every project ships with the documentation package needed to support qualification in the customer's own quality system. At the booth, the quality and validation team can walk through what is included as standard and what is project-specific.
Standard deliverables include material certificates for product-contact parts, instrument calibration certificates, P&ID and electrical drawings, operation and maintenance manuals, and a factory acceptance test protocol agreed before shipment. For aseptic projects, the package extends to a validation support file covering installation and operational qualification protocols, alarm and interlock lists, and cleanroom interface documentation. Where a customer's regulator requires additional evidence - for example extractables data for a specific product-contact elastomer - that is scoped during the technical review rather than promised generically.
Visitors with an active project should bring their user requirement specification, even in draft form. Reviewing a URS against the machine architecture at the stand is far more productive than exchanging documents after the exhibition, and it usually surfaces the two or three decisions that determine the final configuration.
Plan Your Visit: Book a Slot at Booth C8185
Booth C8185 is staffed for all four days, 24–27 November 2026, at Crocus Expo in Moscow. Walk-in visitors are welcome, but scheduled slots are strongly recommended: a technical review of a specific syringe filling machine configuration - product, format, output target and documentation scope - takes 30 to 45 minutes, and the engineers who handle those reviews are booked out early at this exhibition.
To reserve a meeting, send your product type, fill volume, target output and preferred date to our team through the contact page, or message us on WhatsApp with "Pharmtech 2026" as the subject line. We will confirm a time and, where useful, prepare a preliminary line layout before you arrive so that the meeting starts from a concrete proposal rather than a catalogue page. Visitors who cannot travel to Moscow can request a video walkthrough of the factory and a live demonstration on an operating line instead, scheduled in the same week as the exhibition so that decisions are not delayed by a month.
FAQ
What is the date and location of Pharmtech & Ingredients 2026?
The exhibition runs from 24 to 27 November 2026 at Crocus Expo International Exhibition Centre in Moscow, Russia. ALWELL exhibits at Booth C8185 for all four days and receives visitors during official show hours.
Which syringe formats can ALWELL's machine handle?
The standard range covers 1 ml long, 1–3 ml, 5 ml, 10 ml and 20 ml pre-filled needle tubes, in both loose-tube and nested ready-to-use configurations, with cartridge and vial formats available on the same dosing platform. Custom tooling can be engineered for formats outside the standard set.
Can I see a demonstration before the exhibition?
Yes. Send your product details through the contact page and we will arrange a factory video walkthrough and a demonstration on an operating line ahead of the show, so that the Moscow meeting can focus on configuration and commercial terms.